Ultrasonic Flaw Detector (UD3701) เครื่องตรวจสอบความบกพร่องชิ้นงานแบบอัลตราโซนิค

Ultrasonic Flaw Detector (UD3701)
เครื่องตรวจสอบความบกพร่องชิ้นงานแบบอัลตราโซนิค

✅ ตรวจเช็คภายในชิ้นงาน เช่น รอยแตกร้าว, รูพรุน, การกัดกร่อน
✅ ใช้ได้หลายวัสดุ เช่น โลหะ, พลาสติก, แก้ว
✅ แสดงค่าการวัดและกราฟ พร้อมส่งข้อมูลไปยัง PC ได้

Superbright, touch display with which it is comfortable to work outdoors on a sunny day;
Automatic calculation of the delay in the probe;
Frequency range from 0 to 10 MHz, with smooth adjustment;
Display of a scale of scanning in microseconds and millimeters;
The presence in the device of the operating mode of the DAC and TVG curves (up to 16 points);
The presence in the flaw detector of the DGS control mode, with automatic calculation of the equivalent reflector zone;
Carrying out settings both using the touch screen and by keyboard;
The presence of movable blocks of output of measured values, so it can be located in any part of the A-scan;
Archive of measurements, settings, probes with the ability to transfer data to a PC;
Simulation of a measurement from a stored record in the device memory.

Operating frequency range	from 1 to 10,0 MHz
Range of measured time intervals (duration of scanning)	from 6 to 1000 µs
Velocity range	1000 – 9999 m / s
Error of measurement of time intervals	not exceed ± 0,025 µs
Maximum permissible error of measurement of the amplitudes of the signals at the receiver input in the range from 0 to 110 dB	not exceed ± 0,5 dB
Testing gain range	125 dB
Averaging over the quantity of starts	from 1 to 16
Range of variation of temporal sensitivity adjustment (TVG)	40 dB
Number of control points TVG	16
Duration of the excitation pulse to the load	from 0,0 to 0,5 µs
Deviation of the amplitudes of input signals in the range from 10 to 100% of the screen height not more than	1 dB
Setting a delay in the prism of the probe	from 0 to 15 µs
Detection of signals	positive half-wave, radio mode
Standards	EN 12668 ASTM E1324 EN 55011 EN61000-6-2:2001 EN 61010-1:2014 (EN 61010-1:2010) EN 60529:2014 EN ISO 16810:2016 SOU NNEC 027:2014 SOU NNEC 032:2014 SOU NNEC 038:2017
Dimensions (WHL)	140 mm x 210 mm x 55 mm
Weight, not more	1,5 kg
Package	Weight, not more – 4,5kg Dimensions – 40259cm