Combined Hardness Tester NOVOTEST T-UD3

Combined hardness tester combines two methods of measuring hardness: Ultrasonic Contact Impedance (ASTM A1038) and Leeb (ASTM A956). This makes the device the most versatile portable device as it can be.

Small indenter imprint (suits for mirror surfaces of shafts necks, blades, gear teeth, etc.)
Measuring surface hardened layers hardness
Wide range of hardness testing
Various measurement modes
88 combinations of materials and hardness scales (calibrations)
Calibration of any scale in any range
Convenience and ease of measurement
Optimized number of buttons
Large full-color graphic display with bright backlight
Built-in photo camera for thorough reports
Automatic probe types recognition
Connected probe types indication
The calibrations are stored in UCI probe memory
Extended operating temperature range (frost, down to – 40°C)
Internal memory and communication with a PC
New intuitive menu with tips on the buttons
Optional wireless mini printer
Waterproofed housing
Rubber bumper protected housing
Internal clock
Hardness value measuring for any mass products with more than 1 mm thickness (small parts, thin-walled structures, pipes, tanks, steel sheets, articles of complex shape, hardness testing of metal coatings, etc.)
Different operating modes:
- Graph – the graph building mode
- Histogram – the histogram building mode
- Statistics – provides statistics for the current set of measurements
- Smart – filters the incorrect measurements
- Signal – displays the probe signal (only for the Leeb probe)

UCI probe types	1kgf (10N) 2.2 lbf 5kgf (50N) 11lbf 10kgf (98N) 22lbf
Leeb probe types	D DC DL C D+15 E G
Measuring range	HRC:20~70 HB:90~650 HV:230~940 Tensile strength, MPa: 370~1740 User calibrations for any range (for example: HV100-3000)
Measuring accuracy	HRC: 2HRC HB: 10HB HV: 15HV
Standards	ASTM A1038 ASTM A956
Indenter	UCI probe – Diamond indenter Leeb probe – Hardened ball
Measuring direction	Any direction 360°
Data storage	Limited only by the memory card up to 32Gb
Communication	Upload data to PC and export as a spreadsheet (USB cable and software included )
Hardness scales	UCI probe – HRC, HB, HV, MPa Leeb probe – HRC, HRB, HB, HV, HL, MPa Additional custom scales for calibration
Materials	Ultrasonic (UCI) probe – pre-calibrated for steel Dynamic (Leeb) pre-calibrated for steel, alloy steel, cast iron, stainless steel, aluminum, bronze, brass, copper Additional custom materials for calibration
Data display	Load applied/contact (UCI) Angle (Leeb) Single test result Max, Min, Average of tests Number of tests, Deviation Var. coeff. Histogram, Signal and Smart Modes (Filter of incorrect measurements).
Language	English German French Polish Russian *additional languages available by request
Indication	Color LCD display (320×240)
Operating environment	Temperature:-20°C~40°C Humidity: 30%~80%R.H.
Power supply	DC 4,5V (3 pcs batteries AA)
Instrument dimensions	160x75x30mm
Net weight	Approx. 0.3kg (without probe)
Gross weight (package)	2kg
Package dimensions, cm	332710
Battery life	Approx. 10 hours.

Package gross weight, kg	1.8-2kg

“Basic” kit:

Electronic unit Combined Hardness Tester NOVOTEST T-UD3 (Lab)
UCI probe – 1pc (10N, 50N or 98N for choice)
Leeb D type probe – 1pc (other types by request)
Accessory package: – AA batteries – 3 pcs – USB charger – USB cable for PC – PC software: — Online – INFO/USB-connect — Offline – NOVOTEST USB-Connect – NOVOTEST LAB App for Android gadgets – Operating manual/Quick guide – Test certificate – Transportation plastic case

“Advanced 1” kit:

Electronic unit Combined Hardness Tester NOVOTEST T-UD3 (Lab)
UCI probe – 1pc (10N, 50N or 98N for choice)
Leeb D type probe – 1pc (other types by request)
Protective Pouch with Straps for T-UD3
Hardness Test Block HRC, HB, HV (for UCI probe) – 1pc
Hardness Test Block HLD or HLG (for Leeb probe) – 1pc
Accessory package

“Advanced 2” kit:

Electronic unit Combined Hardness Tester NOVOTEST T-UD3 (Lab)
UCI probe – 2pc (50N+10N or 98N)
Leeb D type probe – 1pc
Protective Pouch with Straps for T-UD3
Leeb probe Type DL or DC-R or DC-R mini or G
Hardness Test Block HRC, HB, HV (for UCI probe) – 1pc
Hardness Test Block HLD or HLG (for Leeb probe) – 1pc
Accessory package

“Advanced 3” kit:

Electronic unit Combined Hardness Tester NOVOTEST T-UD3 (Lab)
UCI probe – 1pc (10N, 50N or 98N for choice)
Leeb D type probe – 1pc (other types by request)
Protective Pouch with Straps for hardness tester T-UD3
Hardness Test Block HRC or HB or HV (for UCI probe) – 3pcs
Leeb Hardness Test Block HLD or HLG (for Leeb probe) – 1pc
Device for measuring the hardness of thin sheets NOVOTEST U1-TL
Set of support rings for Leeb probe
Accessory package

“Professional” kit:

Electronic unit Combined Hardness Tester NOVOTEST T-UD3 (Lab)
UCI probe – 1pc (10N, 50N, 98N)
Leeb D type probe – 1pc
Protective Pouch with Straps for T-UD3
Leeb probe Type DL or DC-R or DC-R mini or G
Hardness Test Block HRC or HB or HV (for UCI probe) – 3pcs
Hardness Test Block HLD or HLG (for Leeb probe) – 1pc
Device for measuring the hardness of thin sheets NOVOTEST U1-TL
Set of support rings for Leeb probe
Accessory package

“Expert” kit:

- Electronic unit Combined Hardness Tester NOVOTEST T-UD3 (Lab)
- UCI probe – 2pc (50N+10N or 98N)
- Leeb D type probe – 1pc
- Protective Pouch with Straps for T-UD3
- Leeb probe Type DL or DC-R or DC-R mini or G
- Rockwell Hardness Test Block 25HRC, 45 HRC, 65HRC (for UCI probe) – 3pcs
- Brinell Hardness Test Block 100HB, 200HB, 400HB or other nominals (for UCI probe) – 3pcs
- Vickers Hardness Test Block 200HV, 450HV, 800HV or other nominals (for UCI probe) – 3pcs
- Hardness Test Block HLD or HLG (for Leeb probe) – 1pc
- Device for measuring the hardness of thin sheets NOVOTEST U1-TL
- Set of support rings for Leeb probe
- Accessory package

Tonan Asia Autotech Co., Ltd. บริษัท โทนัน อาเชีย ออโต้เทค จำกัด

295/7-8 Chang-Akad-Uthit Road, Donmuang, Donmuang, Bangkok 10210 Line: @tonanasia Tel: 0-2565-9370-4 E-mail: sales@tonanasia.com Website: https://www.tonanasia.com Google Map: https://goo.gl/maps/SM3p4YGQ6qC2