opus Archive

OPUS Long Series Gauge Blocks

  Long Series Gauge Blocks สตีลเกจบล็อกขนาดยาว มีขนาดตั้งแต่ 125มม สามารถต่อจนได้ความยาวสูงสุด 1,000มม Opus long series steel gauge blocks are carefully manufactured to ISO:3650:1998 from specially selected steel. They have a standard gauge block cross-section of 35mm x 9mm and are available in sizes ranging from 125mm to 1000mm. Each gauge has clamping holes towards both ends for …

OPUS Steel Gauge Blocks

  OPUS Steel Gauge Blocks Steel is the traditional material for gauge blocks. Gauges made from steel can provide many years of useful life if used and looked after carefully. They must me cleaned carefully after use, stored in a dry environment and be protected against corrosion. Opus steel gauge blocks are manufactured from special …

OPUS Tungsten Carbide Gauge Blocks

    OPUS Tungsten Carbide Gauge Blocks Tungsten carbide is an excellent material to manufacture gauge blocks from. Opus tungsten carbide gauge blocks are extremely accurate, stable and have excellent wringing characteristics. Each gauge is manufactured from carefully selected materials having a hardness of approximately 1500 Hv, they set standards of surface finish that are beyond …

OPUS Engineer’s Parallels

  OPUS Engineer’s Parallels Engineer’s Parallels แท่งขนาน Opus Engineer’s Parallels are manufactured to BS 906 Parts 1 & 2, Metric and Imperial Grade A is intended for precision applications such as in an inspection department. Grade B is intended more general tool-room type applications. Both grades are made from high quality steel and hardened to 800 …

OPUS Angle Gauges

OPUS Angle Gauges Angle Gauges เกจวัดมุม Opus Angle Gauges are available as thin series gauges 50mm x 9mm or to NPL Specification MOY/SCMI/18 combination angle gauges. Both styles are made from high quality steel and hardened to 800 Hv (64 Rc) Minimum.  Each gauge is lapped with a superior, highly reflective, wringable finish.  Flatness of each …

OPUS Precision Balls

    OPUS Precision Balls Precision Balls พรีซิชั่นบอล Calibrated precision balls are used in a wide range of applications including in the measurement of small internal tapers, internal annular grooves and throated worm wheels. Each standard set of balls contains a range of sizes, with three matched balls per size.  The main features of Opus precision …

OPUS Ceramic Gauge Blocks

  OPUS Ceramic Gauge Blocks Opus ceramic gauge blocks (Zirco-Blocks) are manufactured from an exceptionally pure grade of  zirconia ceramic. The commonly held belief that all ceramic materials are brittle and prone to catastrophic failure can now be dispelled with the remarkable zirconia ceramic    material which used to manufacture Opus Zirco-Blocks blocks. Coefficient of thermal expansion close to steel …

OPUS Precision Cubes

  OPUS Precision Cubes Precision Cubes ลูกบาศก์ Opus Precision Cubes can be used as a general purpose reflector and for providing a 90 degree angle standard in three planes for setting or checking perpendiculars. Standard Sizes available 50 mm (2 inch) or 25 mm (1 inch) Made from high quality Tungsten Carbide or special Tool Steel …
Yahoo bot last visit powered by  Ybotvisit.com
error: Content is protected !!