Gauge Blocks Archive

Mic-Check Gauge Block Set MW715-01

Mic-Check Gauge Block Set MW715-01 Features Standard: DIN 861 For the inspection of micrometers according to DIN 863 Grade 0 accuracy Nominal sizes (mm): 2.5, 5.1,  7.7,  10.3,  12.9,  15.0,  17.6,  20.2,  22.8,  25.0 mm Optical Flat: 30mm diameter, 12.0mm thick Supplied with a stand to conveniently hold the slip gauges Can be used horizontally or …

Cylinder Bore Gauge Setting Master Kit MW720-01

Cylinder Bore Gauge Setting Master Kit MW720-01 Features • Bore Gauge Setting Master Kit for accurately setting any 2 point bore gauge up to 160mm in diameter to an accuracy of 0.01mm • Setting master and 33 piece metric gauge block set supplied in plastic case Setting Device • Internal range 160mm • Depth range 25mm …

OPUS Long Series Gauge Blocks

  Long Series Gauge Blocks สตีลเกจบล็อกขนาดยาว มีขนาดตั้งแต่ 125มม สามารถต่อจนได้ความยาวสูงสุด 1,000มม Opus long series steel gauge blocks are carefully manufactured to ISO:3650:1998 from specially selected steel. They have a standard gauge block cross-section of 35mm x 9mm and are available in sizes ranging from 125mm to 1000mm. Each gauge has clamping holes towards both ends for …

OPUS Steel Gauge Blocks

  OPUS Steel Gauge Blocks Steel is the traditional material for gauge blocks. Gauges made from steel can provide many years of useful life if used and looked after carefully. They must me cleaned carefully after use, stored in a dry environment and be protected against corrosion. Opus steel gauge blocks are manufactured from special …

OPUS Tungsten Carbide Gauge Blocks

    OPUS Tungsten Carbide Gauge Blocks Tungsten carbide is an excellent material to manufacture gauge blocks from. Opus tungsten carbide gauge blocks are extremely accurate, stable and have excellent wringing characteristics. Each gauge is manufactured from carefully selected materials having a hardness of approximately 1500 Hv, they set standards of surface finish that are beyond …

OPUS Engineer’s Parallels

  OPUS Engineer’s Parallels Engineer’s Parallels แท่งขนาน Opus Engineer’s Parallels are manufactured to BS 906 Parts 1 & 2, Metric and Imperial Grade A is intended for precision applications such as in an inspection department. Grade B is intended more general tool-room type applications. Both grades are made from high quality steel and hardened to 800 …

OPUS Angle Gauges

OPUS Angle Gauges Angle Gauges เกจวัดมุม Opus Angle Gauges are available as thin series gauges 50mm x 9mm or to NPL Specification MOY/SCMI/18 combination angle gauges. Both styles are made from high quality steel and hardened to 800 Hv (64 Rc) Minimum.  Each gauge is lapped with a superior, highly reflective, wringable finish.  Flatness of each …

OPUS Precision Balls

    OPUS Precision Balls Precision Balls พรีซิชั่นบอล Calibrated precision balls are used in a wide range of applications including in the measurement of small internal tapers, internal annular grooves and throated worm wheels. Each standard set of balls contains a range of sizes, with three matched balls per size.  The main features of Opus precision …

OPUS Ceramic Gauge Blocks

  OPUS Ceramic Gauge Blocks Opus ceramic gauge blocks (Zirco-Blocks) are manufactured from an exceptionally pure grade of  zirconia ceramic. The commonly held belief that all ceramic materials are brittle and prone to catastrophic failure can now be dispelled with the remarkable zirconia ceramic    material which used to manufacture Opus Zirco-Blocks blocks. Coefficient of thermal expansion close to steel …

OPUS Precision Cubes

  OPUS Precision Cubes Precision Cubes ลูกบาศก์ Opus Precision Cubes can be used as a general purpose reflector and for providing a 90 degree angle standard in three planes for setting or checking perpendiculars. Standard Sizes available 50 mm (2 inch) or 25 mm (1 inch) Made from high quality Tungsten Carbide or special Tool Steel …
Yahoo bot last visit powered by  Ybotvisit.com
Aluminium Accessories Aluminium Profile Slot10 Aluminium Profile Slot6 Aluminium Profile Slot8
D-Bracket 20×40
D-Bracket 30×60
D-Bracket 40×80
Air Gauges Calipers Indicators Special Bore Measurements Universal Gauges
An Introduction to the Bowers MicroGauge 2-Point Bore Gauge
Connecting and Using Bluetooth – XT3 Bore Gages
NEW XT3 Digital Pistol Grip Bore Gauge – Metric
Borescope Lighting & Accessories Flexible Borescope Rigid Borescope Video Borescope
Hawkeye® V2 Accessories
Borescope Lighting
Hawkeye® V2 Video Borescopes
Brinell Hardness Tester Portable Hardness Tester Rockwell Hardness Tester Universal Hardness Tester Vickers Hardness Tester
Premium Micro-Vickers Hardness Tester EW-110/D2
Premium Micro-Vickers Hardness Tester EW-110/A2
Premium Micro-Vickers Hardness Tester EW-105/D1
Clamp Magnifying Lamp Desk Magnifying Lamp (Swing type) Desk Magnifying Lamp (XY type) Floor Magnifying Lamp LED Magnifying Lamp
Clamp Magnifying Lamp (LED) Square Lens x5
Clamp Magnifying Lamp
Desk Magnifying Lamp/ Swing type
Angle Meter Bore Measurement Combination Set Depth Gauge Dial Indicator Dial Test Indicator Drill Gauge External Caliper Feeler Gauge Gauge Blocks Height Gauge Level Lifting Type Thickness Gauge Magnetic Indicator Stand Micrometer Protractor Radius Gauge Screw Cutting Gauge Screw Pitch Gauge Square Surface Plate Tyre Profile Gauge Vernier Caliper Wire Gauge
Steel Pin Gauge Sets MW725 Series
Digital IP54 Engineers’ Set MW200-SET4
Digital Workshop Engineers’ Set MW200-SET3
Digital Mini Microscope (USB) Laboratory Microscope LCD Microscope Lighting & Accessories Metallurgical Microscope Pocket Microscope Profile Projector Scale Loupe Video Microscope Vision System Zoom Lens, Monocular Microscope Zoom Stereo Microscope
Baty Fusion Software
Baty Vision Systems – VuMaster
Baty Venture – Vision System
เครื่องชั่งชนิดแท่นวางพื้น เครื่องชั่งดิจิตอลทั่วไป เครื่องชั่งดิจิตอลนับจำนวน เครื่องชั่งวิเคราะห์ชนิดความละเอียดสูง
เครื่องชั่งนับจำนวน ECM Counting Scales
PGW Precision Balance
CDR Weighting Scales
Cross Cut Tester Digital Coating Thickness Gauge Force Gauge Gloss Meter Infrared Thermometer Lux Meter pH Meter Sound Level Meter Surface Roughness Tester Temperature&Humidity Meter Ultrasonic Thickness Gauge Universal Testing Machine Vibration Meter
Combined Hardness Tester NOVOTEST T-UD3
DT-156 CEM Paint Coating Thickness Meter Gauge F/NF 1250um
Surface Roughness Tester IPX-105
Activities & Exhibitions Highlight Products Hot Sale Products New Products Promotion of the month! ตอบคำถามประจำเดือน เฉลยคำถามประจำเดือน
Bluetooth Instrument Demo – Bowers Group
ประกาศรายชื่อผู้โชคดีและเฉลยคำถาม กิจกรรมเดือนกุมภาพันธ์ 2560
Quiz “ทายคำศัพท์ภาษาอังกฤษในช่องว่าง 10ภาพ ” กิจกรรมเดือนมีนาคม 2560
Downloads Picture Applications Technical Library Video Applications
ความเข้มของแสงต่อนัยน์ตามนุษย์
พลังงานทดแทนคืออะไร
Measurement of Dovetail Slots & Turbine Blade Grooves_01
error: Content is protected !!